You might have purchased and used an awesome oxygen compressor? In fact, even if it is really simple, using an oxygen compressor is not an easy task. However, the maintenance when using the oxygen compressor is crucial.
How to use an oxygen compressor?
O2 compressor workout maintenance and precautions
Easy methods to work with an oxygen compressor?
Using an oxygen compressor simply isn't as complicated as you may want think, it's actually easy. After the compressor is definitely installed, it can end up being place in normal operation after standard test. If you need to adjust a parameter, you might want to follow the steps listed below:
- Pressure switch setpoint change
The machine usually characteristics 2 pressure switches. Finding the one you might like to adjust not only needs to discover ways to use the oxygen compressor, plus the maintenance of the precise oxygen compressor, because it relates to normal use. Control primary principle: Loading pressure (starting pressure) + differential variety = stop pressure.
l As soon as adjusting, take the pressure gauge because of the standard and loosen that tightening nut;
l Decrease the loading pressure: flip the pressure adjusting screw clockwise (pointer up, pressure decrease) for half seven days, observe whether the loading pressure meets certain specifications (because the pressure difference is just not adjusted, the stopping desire will change accordingly), otherwise, adjust it appropriately.
l Increase the pressure difference: rotate the exact differential pressure adjustment affix counterclockwise (the pointer variations down, the pressure difference increases) for half Seven days, and observe whether the pressure difference is definitely the stop pressure or definitely not, if no adjustment is usually created.
l After each one strain value is totally reset, lock the nut and correct the parameters as soon as. Increase the loading force or reduce the force difference plus reverse the adjustment because described over. The inlet pressure switch adjustment method is usually the same, but the wiring method takes an alternative approach, the stop difficulty currently = starting pressure - differential pressure. It can be strictly forbidden to perform the machine above this rated fatigue pressure.
COUPLE OF. Temp controller adjustment
Each stage with the compressor gives you the temperature controller, and that is installed about the control cabinet panel plus its set at the production plant.
Set it, in case you should reset, please refer into the manual of the cunning temperature controller.
- Energy relay regulation
The thermal relay acts to be a motor overload protection. Occasionally, the motor will conclude rotating. If the set value is thought he would be malfunctioning, it ought to be properly adjusted by skilled electric work, and the running current must be measured. When the compressor can be working normally, there is less work that they are maintained, but it must be handled by a particular person. It should be patrolled twice per shift to see whether the compressor boasts abnormal heat, abnormal vibration, unusual sound, etc. If it is important, stop it immediately. Promptly after confirming the troubleshooting, it is possible to continue to run. Every time they get home of each shift, the ability should be turned off combined with intake valve closed. So that you can ensure long-term reliable operation inside machine, it must always be checked regularly.
Oxygen compressor routine maintenance and precautions
A DEFINITE. When the compressor is merely running, it must carefully do necessary inspections plus inspections, monitor the operating conditions to the compressor, closely monitor this kind of suction, exhaust pressure along with temperature, exhaust volume, cooling water temperature and various control indicators, pay particular attention to abnormal noises, and Record every from time to time.
- During the performance, the process gas shall be strictly prevented from being crushed inside low-pressure cylinder and other gas pipelines due to the high-pressure cylinder to avoid oil, water and waters.
- It is forbidden to overpower the compressor under over-temperature, over-pressure coupled with over-speed. If there can be any abnormality, you should carefully clear away the fault and report it with time.
- Gas leakage Once the vehicle was in catastrophe stop, the power must be cut off in the particular substation.
- When repairing kit, carefully check the maintenance license in addition to the relevant safety inspection regulations to be sure the safety of that inspection.
- When putting into action an oxygen compressor, never use oily sand to wipe the equipment, pipes, valves and parts. Do not be contaminated by oil. Degreasing treatment should be carried out after inspection, and flammable gas leakage monitoring equipment ought to be provided.
- Check the slicer room and arbitrarily number flammable materials.
You don't have to fret about the caliber on the compressor, because your o2 compressors, nitrogen compressors, CO2 compressors, etc. have passed the EU CE certification so are also recognized for the safety inside compressor. If you still don't realize how to use it, you are able to consult us. But be sure you pay attention to defense work.